Profile drivers can specify scanning parameters settings for their device(s) in their profile driver's INF file to tailor to the specific needs of a given device scenario. You can override the default system scanning parameters by providing one or more of the following scanning parameters listed below into the AddReg directive. If the provided Aiphone USB to Serial cable is not shown in the Device Manager, install the drivers found here, reconnect the cable and relaunch the programming software. AX Series wiring distances.

  1. Aiphone Port Devices Driver Vga
  2. Aiphone Port Devices Driver
  3. Aiphone Port Devices Drivers
  4. Aiphone Port Devices Driver Updater

If your computer doesn't recognize your connected device, you might see an unknown error or a '0xE' error. If you do, follow these steps and try to connect your device again after each step:

  1. Make sure that your iOS or iPadOS device is unlocked and on the Home screen.
  2. Check that you have the latest software on your Mac or Windows PC. If you're using iTunes, make sure you have the latest version.
  3. Make sure that your device is turned on.
  4. If you see a Trust this Computer alert, unlock your device and tap Trust.
  5. Unplug all USB accessories from your computer except for your device. Try each USB port to see if one works. Then try a different Apple USB cable.*
  6. Restart your computer.
  7. Restart your device:
  8. Try connecting your device to another computer. If you have the same issue on another computer, contact Apple Support.

For more help, follow the steps below for your Mac or Windows PC.


* Learn how to connect iPad Pro (11-inch) or iPad Pro 12.9-inch (3rd generation) to your computer.

If you use a Mac

  1. Connect your iOS or iPadOS device and make sure that it's unlocked and on the Home screen.
  2. On your Mac, hold down the Option key, click the Apple menu, and choose System Information or System Report.
  3. From the list on the left, select USB.
  4. If you see your iPhone, iPad, or iPod under USB Device Tree, get the latest macOS or install the latest updates. If you don't see your device or still need help, contact Apple Support.

If you use a Windows PC

The steps differ depending on if you downloaded iTunes from the Microsoft Store or from Apple.

If you downloaded iTunes from the Microsoft Store

Aiphone port devices drivers

Follow these steps to reinstall the Apple Mobile Device USB driver:

  1. Disconnect your device from your computer.
  2. Unlock your iOS or iPadOS device and go to the Home screen. Then reconnect your device. If iTunes opens, close it.
  3. Click and hold (or right-click) the Start button, then choose Device Manager.
  4. Locate and expand the Portable Devices section.
  5. Look for your connected device (such as Apple iPhone), then right-click on the device name and choose Update driver.
  6. Select 'Search automatically for updated driver software.'
  7. After the software installs, go to Settings > Update & Security > Windows Update and verify that no other updates are available.
  8. Open iTunes.

If you downloaded iTunes from Apple

Follow these steps to reinstall the Apple Mobile Device USB driver:

  1. Disconnect your device from your computer.
  2. Unlock your iOS or iPadOS device and go to the Home screen. Then reconnect your device. If iTunes opens, close it.
  3. Press the Windows and R key on your keyboard to open the Run command.
  4. In the Run window, enter:
    %ProgramFiles%Common FilesAppleMobile Device SupportDrivers
  5. Click OK.
  6. Right-click on the usbaapl64.inf or usbaapl.inf file and choose Install.
    You might see other files that start with usbaapl64 or usbaapl. Make sure to install the file that ends in .inf. If you’re not sure which file to install, right-click a blank area in the File Explorer Window, click View, then click Details to find the correct file type. You want to install the Setup Information file.
  7. Disconnect your device from your computer, then restart your computer.
  8. Reconnect your device and open iTunes.

If your device still isn't recognized

Check Device Manager to see if the Apple Mobile Device USB driver is installed. Follow these steps to open Device Manager:

  1. Press the Windows and R key on your keyboard to open the Run command.
  2. In the Run window, enter devmgmt.msc, then click OK. Device Manager should open.
  3. Locate and expand the Universal Serial Bus controllers section.
  4. Look for the Apple Mobile Device USB driver.

If you don't see the Apple Mobile Device USB Driver or you see Unknown Device:

  • Connect your device to your computer with a different USB cable.
  • Connect your device to a different computer. If you have the same issue on another computer, contact Apple Support.

If you see the Apple Mobile Device USB driver with an error symbol:

If you see , , or next to the Apple Mobile Device USB driver, follow these steps:

  1. Restart the Apple Mobile Device Service.
  2. Check for and resolve issues with third-party security software, then restart your computer.
  3. Try to install the usbaapl64.inf or usbaapl.inf file again.
-->

Windows versions

Aiphone port devices driver updater
  • Windows 10 for desktop editions (Home, Pro, Enterprise, and Education)
  • Windows 10 Mobile

Common points of discussion for OEMs who want to build Windows systems with USB Type-C connectors.

USB Type-C connector features

Symmetric and reversible design

  • The connector is symmetric. The cable has a USB Type-C connector on each end allowing the host and function device to use USB Type-C connectors. Here is an image that compares the connectors:
  • The connector is designed to be reversible. Traditional connectors had to be connected the 'right-side-up'. With the reversible design, the connector can be flipped.

Supports all USB device speeds

The connector can support USB devices that are low-speed, full-speed, high-speed, SuperSpeed (including SS+).

Alternate modes

The connector can support alternate modes. The alternate mode feature allows non-USB protocols to run over the USB cable, while simultaneously preserving USB 2.0 and charging functionality. Currently, the most popular alternate modes are DisplayPort/DockPort and MHL.

DisplayPort / DockPort

This alternate mode allows the user to project audio/video to external DisplayPort displays over a USB connector.

MHL

Aiphone Port Devices Driver Vga

The MHL alternate mode is allows the user to project video/audio to external displays that support MHL.

Billboard error messages

If a user connects a USB Type-C alternate mode device or adapter that is not supported by the attached PC or phone, the device or adapter can expose a Billboard device that contains information about the error condition to help the user troubleshoot issues.

Increased power limits

A system with USB Type-C connectors has higher power limits, it can support up to 5V, 3A, 15W.

In addition, the connector can optionally support the power delivery feature as defined by the USB Power Delivery OEM . If the connector supports power delivery, a USB Type-C system can be a power source provider or a consumer and support up to 100W.

Supports USB dual roles

Peripheral devices can connect to a mobile system with USB Type-C connectors, changing the traditional role of a mobile system from function to host. When the same system is connected to a PC, the system resumes the role of a function and PC becomes the host.

Operating system input into which alternate mode needs to be negotiated, such as DP 2-lane vs. DP 4-lane

No. The operating system (or any Microsoft-provided software component) plays no part in selecting an alternate mode. The decision is made by the driver for the connector, specifically the USB connector manager (UCM) client driver. The driver does so by communicating with the connector's firmware by using hardware interfaces.

Pre-OS charging with Type-C and PD

Enabling pre-OS charging is owned by the OEM. You can choose to not implement USB Power Delivery, and charge at USB Type-C power levels until you boot into the operating system.

Charging the phone when it is a USB host to enable docking scenarios like Continuum

Here are a few things to consider:

  • You must to implement USB Power Delivery, so that power and data roles can be swapped independently.

  • Your dock’s upstream port should be implemented as a Charging UFP, defined in the USB Type-C specification. For details, see section 4.8.4, version 1.1.

  • Your dock should request a DR_Swap if it resolved to a DFP, or a PR_Swap if it resolved to a UFP.

    The initial DFP is the power source, so you must change the data role. The initial UFP is the power sink, so you must change the power role. You can perform those operations in your implementation of these callback functions:

Windows 10 Mobile support of USB billboard devices

Yes, if you connect the phone to a device that supports a USB Billboard, as per the USB Device Class Definition for Billboard Devices specification, the user is notified. Your USB connector manager (UCM) client driver is not required to handle the notification. If your system does not recognize the alternate mode, do not enter the mode.

Support for USB Type-C on earlier versions of Windows

USB Type-C is not supported on versions of Windows prior to Windows 10.

UCSI support on earlier versions of Windows

UCSI is not supported on versions of Windows prior to Windows 10.

How to test an implementation of UCSI

Aiphone port devices driver device

To test your implementation, follow the guidelines given in USB Type-C manual interoperability test procedures. We recommend running USB tests in Windows Hardware Lab Kit (HLK) for Windows 10. These tests are listed in Windows Hardware Certification Kit Tests for USB.

Conditions and UI for the different errors

Windows 10 can show a set of USB Type-C error messages to help educate users about the limitations with different combinations of USB Type-C hardware and software. For example, the user might get 'Device is charging slowly' message if the charger connected to the USB Type-C connector is not powerful enough, not compatible with the system, or is connected to a non-charging port. For more information, see Troubleshoot messages for a USB Type-C Windows system.

Aiphone port devices driver device

Connecting a non-PD port to a PD provider and a PD consumer to a system that is not a PD provider

The non-PD port attempts to charge the system by using USB Type-C current levels. For more information, see USB 3.1 and USB Type-C specifications.

Connecting Thunderbolt, SuperMHL, or PCI express to a PC that does not support those capabilities

The alternate mode feature allows non-USB protocols (such as Thunderbolt, SuperMHL) to run over the USB cable, while simultaneously preserving USB 2.0 and charging functionality. If a user connects a USB Type-C alternate mode device or adapter that is not supported by the attached PC or phone running Windows 10, an error condition is detected and a message is shown to the user.

  • If the device or adapter exposes a Billboard device, the user sees information about the error condition to help the troubleshoot issues. Windows 10 provides an in-box driver for a Billboard device and notifies the user that an error has occurred.
  • The user might see an error notification, 'Try improving the USB connection'. For more information, see Fix USB-C Problems.

For the best results, make sure that the alternate mode device or adapter’s requirements are met by PC or phone or cable.

Support and limitations for MTP over USB Type-C in Windows

Windows 10 for desktop editions supports MTP in the initiator role; Windows 10 Mobile supports MTP in the responder role.

How downstream devices and hubs connect and communicate with USB Connector Manager (UCM)

UCM is its own device stack (see Architecture: USB Type-C design for a Windows system). Windows 10 support for USB Type-C includes the required plumbing to make sure that the different class drivers know how to communicate with the different USB Type-C connectors. In order to get Windows 10 support for USB Type-C, you must plug into the UCM device stack.

USB Type-C MUTT requirements for HLK tests

The Windows HLK for Windows 10 contains tests for USB host and function controllers. To test your system, use a USB C-A adapter. These tests are listed in Windows Hardware Certification Kit Tests for USB.

Microsoft support for P2P data transfer between the same Windows 10 SKU

This is not a valid connection.

Aiphone Port Devices Driver

  • You cannot connect two PCs running Windows 10 for desktop editions.
  • You cannot connect two mobile devices running Windows 10 Mobile.

Aiphone Port Devices Drivers

If the user attempts to make such a connection, Windows shows an error message. For more information, see Error messages for a USB Type-C Windows system.

The only valid connection is between a Windows Mobile device and Windows desktop device.

UCM class extension (UcmCx) communication with PMIC or battery driver to get/set charging status

On software-assisted charging platforms, UcmCx communicates with PMIC and the battery subsystem. The client driver may determine the charging levels by communicating with the hardware through hardware interfaces. On hardware-assisted platforms, the embedded controller is responsible for charging. UcmCx takes no part in the process.

HLK support for USB Type-C

In Windows HLK for Windows 10, there are no USB Type-C specific tests. We recommend running USB tests in Windows HLK for Windows 10. These tests are listed in Windows Hardware Certification Kit Tests for USB.

UCSI

USB Type-C Connector System Software Interface (UCSI) Specification describes the capabilities of the USB Type-C Connector System software Interface (UCSI), and explains the registers and data structures, for hardware component designers, system builders, and device driver developers.

Microsoft provides an in-box driver with Windows, UcmUcsi.sys, that implements the features defined by the specification. This driver is intended for systems with embedded controllers.

Test a UCSI implementation running on Windows 10

We recommend running USB tests in Windows HLK for Windows 10. These tests are listed in Windows Hardware Certification Kit Tests for USB.

Test a UCMCx client driver on Windows 10

Aiphone Port Devices Driver Updater

We recommend running USB tests in Windows HLK for Windows 10. These tests are listed in Windows Hardware Certification Kit Tests for USB.

VBus/VConn control and role switch operations handled by the UCM class extension

The UCM class extension might get requests from the operating system to change data or power direction of the connector. When it gets those requests, it invokes client driver's implementation of EVT_UCM_CONNECTOR_SET_DATA_ROLE and EVT_UCM_CONNECTOR_SET_POWER_ROLE callback functions (if the connector implements PD). In the implementation, the client driver is expected control the VBUS and VCONN pins. For more information about those callback functions, see Write a USB Type-C connector driver.

Coments are closed

Most Viewed Posts

  • Drivers Areca Motherboards
  • Biometric Driver Download For Windows 10
  • Ardence Driver Download
  • Drivers CDI
  • Csn Industrie Driver Download For Windows 10

Scroll to top