This article will show you three easy ways to fix the common Windows 10/8/7/XP problem that brings up the error: “the last USB device malfunctioned and is not recognized”.

If you connected a USB device to your computer recently, the error means that the device either malfunctioned or for some other reason, Windows cannot access the device. You will learn how to solve this issue here.

1How to Fix “the Last USB Device Malfunctioned” in Windows 10?

1Remove Power Supply

3 Different Ways To Find Unknown Devices Drivers In Windows Another possibility is to scan using DriverMax, which may reveal sthg useful. See this: Fix USB Device Not Recognized Device Descriptor Request Failed in Windows 10/8.1/8/7 - YouTube - you don't need the audio- the 4 methods are quite well illustrated. The driver corsairVBusdriver.sys is installed for Corsair keyboards, but has been causing problems for a long time. In Microsoft Answers there is this thread which started on Oct 6, 2020. Thread creator writes: After running optional system update for Corsair devices, my ASUS RoG G771 laptop is completely unusable.

Before doing anything, if you get this error, you should first disconnect the power supply to the PC and take the following steps.

1. Unplug the power supply from the PC.

2. Reboot the computer.

3. Connect the USB device to the computer via a USB.

4. Reconnect the PC to external power.

2Reinstall USB Device Driver

You can also try getting the PC to recognize the USB Device by reinstalling the device drivers.

Step 1: Run Device Manager by right-clicking the Windows logo and then clicking Device Manager.

Step 2: Locate and expand Universal Serial Bus Controllers. Right-click a USB driver and click Uninstall. Repeat this for all USB drivers.

Step 3: Restart your computer.

3Change the USB Selective Suspend Settings

Step 1: Open Control Panel on your computer and click Power Options.

Step 2: Click Change Plan Settings.

Step 3: Select Change advanced power settings.

Step 4: Expand USB settings and USB Selective Suspend Settings to reveal other items under it.

Step 5: Disable On battery and Plugged in settings.

Step 6: Click Apply and OK.


2How Does “the Last USB Device Malfunctioned” Happen in Windows 10?

This error is common, as we have pointed out, and the cause of the problem can vary from computer to computer, because of their different computer environment combinations. However, it is generally caused by bad USB ports or bugs in the USB controllers.

Another thing is that the error that renders USB devices unusable is not peculiar to any specific Windows version. Apart from the methods highlighted above, we will show you the quickest, easiest and safest way to recover your data after fixing the USB device malfunction error.

3Recover Data after Fixing “the Last USB Device Malfunctioned in Windows 10'

Getting a “the Last USB Device Malfunctioned” error is frustrating, especially when all the easy fixes here do not work. The only thing you can do in this case is to recover your data from it, and that is where the fantastic software called iMyFone AnyRecover comes in.

Features of iMyFone AnyRecover:

Restores data from all types of storage devices including PC, mobile phone, external hard drive, SSD, etc.

Supports recovering more than a thousand file types: document, video, photo, audio, email, and so on.

Recovers lost files without overwriting your original data.

Corsair usb driver download

Its free trial version allows you to deeply scan your lost files and retrieve 3 files for free.

It is an intuitive program that anyone can use effectively, regardless of their tech skills or knowledge.

How to Recover Lost File with iMyFone AnyRecover?

Step 1. Run AnyRecover. Connect your USB device to the computer. Then select the USB device that you want to recover your data from.

Step 2. After selecting the location, chick “Start” button to start scanning.

Step 3. When the scanning is complete, this program proceeds to show you all the files that match your criteria and the folder in which they are. Preview the files to be sure and then hit “Recover” to start retrieving them fast.

Note: Do NOT save the recovered files in the external device that you lost them so as to avoid these files being overwritten.


“The Last USB Device malfunctioned” error occurs on Windows 10 when the computer cannot access or open a USB device, and because of this, you would not be able to view or manipulate files contained in the USB device.

Corsair Usb Drivers Windows 10

Thanks to the methods listed on this page, you now know the root of this issue and what to do to get rid of the error if you ever need to. More so, if all the methods do not work, you can opt to recover your lost files by using iMyFone AnyRecover.

If you found this “uninvited guest,” Corsair USBXp Driver, in your Device Manager, don’t worry – many people have reported the same. This is a fairly common issue, and it’s usually not very hard to resolve.

4 fixes for Corsair USBXp Driver issues

The reason for your Corsair USBXp Driver issue often comes down to driver failures. In most cases you should be able to solve this problem using one of the four fixes below. You may not need to try them all; just work your way from the top down until you find the one that works.

Fix 1: Download another version of Corsair Link

Corsair usb driver download

Some certain versions of Corsair Link may be related to the occurrence of this issue, so you should uninstall whatever version you’re using right now and reinstall a new one that works properly. Even if you haven’t installed Corsair Link on your computer before, you can still expect this fix to do the trick. Just try it!

1) On your keyboard, press the Windows logo key and I at the same time to open the Settings window. Then click Devices.

2) In the next window, select your Corsair device (the one that’s causing your Corsair USBXp Driver issue) and click Remove device.

3) On your keyboard, press the Windows logo key and R at the same time to invoke the Run dialog box. Type in appwiz.cpl and click OK.

4) In the pop-up window, scroll through the list until you find the Corsair Link app (you may skip this step if you have no Corsair Link). Right-click on it and click Uninstall.

5) After you’ve removed the Corsair device and uninstalled Corsair Link, it’s time to reinstall another version of the app. Visit this website, download Corsair Link, and install it on your PC all over again.

An early version released in 2017, which is, should be applicable to fix the problem. Since it’s a bit old, you can try downloading the latest version of Corsair Link ( If it doesn’t work, then take a stab at

6) When you’re all set, launch Corsair Link and see if the app can recognize your Corsair device.

Then open Device Manager and check whether the Corsair USBXp Driver item is still there. If it is, move on to the next fix.

Fix 2: Reinstall your Corsair device driver

There’s a chance that your Corsair device driver has run into glitches that rendered it corrupt or unreadable. In this case, you should reinstall the driver by the following steps:

1) On your keyboard, press the Windows logo key and R at the same time to invoke the Run dialog box. Type in devmgmt.msc and click OK.

2) In the Device Manager window, expand Universal Serial Bus controllers to find the Corsair USBXp Driver item.

3) Right-click Corsair USBXp Driver and select Uninstall device.

Corsair Usb Devices Driver Win 7

4) When Windows asks you to confirm, click Uninstall.

5) Wait till the uninstall process is complete and then restart your computer.

6) After the system has been restarted, your Corsair device driver will be reinstalled automatically. If everything goes on well, the Corsair USBXp Driver item should disappear from the Device Manager.

Corsair Void Usb Driver

In case your problem remains, please proceed to Fix 3 below.

Fix 3: Update your Corsair device driver

Sometimes your Corsair USBXp Driver issue is caused by an outdated driver. To update the driver, you have two options:

Option 1 – Update the driver via Device Manager – This is the most common method to update your driver, but sometimes Windows may fail to provide you with the latest (and even necessary) device drivers.


Option 2 – Update the driver automatically (Recommended)– This is the quickest and easiest option. It’s all done with just a couple of mouse clicks – easy even if you’re a computer newbie.

Option 1 – Update the driver via Device Manager

Here’s how:

1) On your keyboard, press the Windows logo key and R at the same time to invoke the Run dialog box. Type in devmgmt.msc and click OK.

2) In the Device Manager window, expand Universal Serial Bus controllers to find the Corsair USBXp Driver item.

3) Right-click Corsair USBXp Driver and select Update driver.

Corsair Usb Driver Download

4) In the pop-up window, select Search automatically for updated driver software.

Corsair Usb Dongle Driver

5) Wait for the searching process to be complete. If there’s indeed a pending update, you should follow the onscreen instructions to install it. However, if Windows informs you that your driver is up to date (which may not be true), you should give Option 2 a whirl.

Option 2 – Update the driver automatically (Recommended)

If the above option failed to provide you with the latest driver, you can rely on Driver Easyto perform the update.

Corsair usb drives

Driver Easy will automatically recognize your system and find the correct drivers for it. You don’t need to know exactly what system your computer is running, you don’t need to risk downloading and installing the wrong driver, and you don’t need to worry about making a mistake when installing. Driver Easy takes care of everything.

You can update your drivers automatically with either the FREE or the Pro version of Driver Easy. But with the Pro version it takes just 2 clicks (and you get full support and a 30-day money back guarantee):

1) Download and install Driver Easy.

2) Run Driver Easy and click the Scan Now button. Driver Easy will then scan your computer and detect any problem drivers.

3) Click Update All to automatically download and install the correct version of all the drivers that are missing or out of date on your system (this requires the Pro version – you’ll be prompted to upgrade when you click Update All). Or if you just want to update your Corsair device driver for now, simply click the Update button next to it.

Note: you can do it for free if you like, but it’s partly manual.

If you have any problems when using Driver Easy to update your driver, please feel free to email us at [email protected]. We’re always here to help.

If updating drivers didn’t help, then you should try out the next fix.

Fix 4: Check your fan connectors

According to some users of Corsair cooling fans, they got the issue because their fan connectors have gone loose. This can be easily fixed by pushing the connectors back in and reconnecting the fans. If you’re not sure whether the connection of your Corsair fans is all right, you should check.

Hopefully you found this post helpful. Please feel free to leave a comment below if you have any further questions or ideas. Thanks for reading!

Coments are closed

Most Viewed Posts

  • Daktech Laptops & Desktops Driver Download For Windows 10
  • Abit Driver Download For Windows 10
  • Drivers Cesys Microelectronics

Scroll to top