-->

This article helps to fix an issue in which Windows 10 doesn't install specific drivers for USB audio devices on the first connection.

If the device is not yet connected, first install the device-specific driver, such as by using the appropriate installer. After the device-specific driver is installed, Windows 10 will select that driver instead of the standard USB audio 2.0 driver when you first connect the device. Expand Universal Serial Bus controllers. Right click the USB controller then click 'Uninstall.' If Device Manager asks, click the option to delete the driver. Repeat steps 3 and 4 for all of the USB controllers. Restart your PC. After restarting, Windows 10 should automatically reinstall the device drivers for your USB ports. Universal Serial Bus (USB) is a communications architecture that gives a personal computer (PC) the ability to interconnect a variety of devices using a simple four-wire cable. The USB is actually a two-wire serial communication link that runs at either 1.5 or 12 megabits per second (mbs). USB protocols can configure devices. Usb driver download - Best answers Download usb driver - Best answers Spvd-012.1 usb driver for windows 10 - Forum - Drivers.

Drivers Amt-cartech USB Devices

Original product version: Windows 10, version 1703
Original KB number: 4021854

Symptom

When you connect a USB audio device to a Windows 10 Version 1703-based computer the first time, the operating system detects the device but loads the standard USB audio 2.0 driver (usbaudio2.sys) instead of the specific device driver.

Cause

This issue occurs because the USB audio 2.0 driver (usbaudio2.sys) isn't classified as a generic driver in Windows 10 Version 1703. Therefore, the system assumes that a compatible, nongeneric driver is installed for the device even though the driver is generic.

This issue also causes Windows 10 Version 1703 to postpone the search for other compatible drivers through Windows Update that typically occurs immediately after you install a new device.

Resolution

To fix this issue, use one of the following methods.

Method 1

To resolve this issue, install update 4022716.

Method 2

If the device-specific driver is distributed through Windows Update, you can manually update the driver by using Device Manager. For more information about how to do this, see update drivers in Windows 10.

Method 3

If the device is not yet connected, first install the device-specific driver, such as by using the appropriate installer. After the device-specific driver is installed, Windows 10 will select that driver instead of the standard USB audio 2.0 driver when you first connect the device.

Note

See the device manufacturer's user guide for specific instructions about how to install the driver.

Method 4

If the driver isn't distributed through Windows Update, you can manually reinstall the driver. To do this, follow these steps:

  1. Install the device-specific driver (see Method 2).
  2. Open Device Manager.
  3. Right-click (or tap and hold) the name of the device, and then select Uninstall.
  4. Restart the computer.

When it restarts, Windows will try to reinstall the device by using the device-specific driver.

If your computer doesn't recognize your connected device, you might see an unknown error or a '0xE' error. If you do, follow these steps and try to connect your device again after each step:

  1. Make sure that your iOS or iPadOS device is unlocked and on the Home screen.
  2. Check that you have the latest software on your Mac or Windows PC. If you're using iTunes, make sure you have the latest version.
  3. Make sure that your device is turned on.
  4. If you see a Trust this Computer alert, unlock your device and tap Trust.
  5. Unplug all USB accessories from your computer except for your device. Try each USB port to see if one works. Then try a different Apple USB cable.*
  6. Restart your computer.
  7. Restart your device:
  8. Try connecting your device to another computer. If you have the same issue on another computer, contact Apple Support.

For more help, follow the steps below for your Mac or Windows PC.


* Learn how to connect iPad Pro (11-inch) or iPad Pro 12.9-inch (3rd generation) to your computer.

If you use a Mac

  1. Connect your iOS or iPadOS device and make sure that it's unlocked and on the Home screen.
  2. On your Mac, hold down the Option key, click the Apple menu, and choose System Information or System Report.
  3. From the list on the left, select USB.
  4. If you see your iPhone, iPad, or iPod under USB Device Tree, get the latest macOS or install the latest updates. If you don't see your device or still need help, contact Apple Support.

Drivers Amt-cartech Usb Devices Pc Camera

If you use a Windows PC

The steps differ depending on if you downloaded iTunes from the Microsoft Store or from Apple.

If you downloaded iTunes from the Microsoft Store

Follow these steps to reinstall the Apple Mobile Device USB driver:

  1. Disconnect your device from your computer.
  2. Unlock your iOS or iPadOS device and go to the Home screen. Then reconnect your device. If iTunes opens, close it.
  3. Click and hold (or right-click) the Start button, then choose Device Manager.
  4. Locate and expand the Portable Devices section.
  5. Look for your connected device (such as Apple iPhone), then right-click on the device name and choose Update driver.
  6. Select 'Search automatically for updated driver software.'
  7. After the software installs, go to Settings > Update & Security > Windows Update and verify that no other updates are available.
  8. Open iTunes.

If you downloaded iTunes from Apple

Follow these steps to reinstall the Apple Mobile Device USB driver:

  1. Disconnect your device from your computer.
  2. Unlock your iOS or iPadOS device and go to the Home screen. Then reconnect your device. If iTunes opens, close it.
  3. Press the Windows and R key on your keyboard to open the Run command.
  4. In the Run window, enter:
    %ProgramFiles%Common FilesAppleMobile Device SupportDrivers
  5. Click OK.
  6. Right-click on the usbaapl64.inf or usbaapl.inf file and choose Install.
    You might see other files that start with usbaapl64 or usbaapl. Make sure to install the file that ends in .inf. If you’re not sure which file to install, right-click a blank area in the File Explorer Window, click View, then click Details to find the correct file type. You want to install the Setup Information file.
  7. Disconnect your device from your computer, then restart your computer.
  8. Reconnect your device and open iTunes.

If your device still isn't recognized

Check Device Manager to see if the Apple Mobile Device USB driver is installed. Follow these steps to open Device Manager:

  1. Press the Windows and R key on your keyboard to open the Run command.
  2. In the Run window, enter devmgmt.msc, then click OK. Device Manager should open.
  3. Locate and expand the Universal Serial Bus controllers section.
  4. Look for the Apple Mobile Device USB driver.

If you don't see the Apple Mobile Device USB Driver or you see Unknown Device:

  • Connect your device to your computer with a different USB cable.
  • Connect your device to a different computer. If you have the same issue on another computer, contact Apple Support.

Kinds Of Usb Devices

If you see the Apple Mobile Device USB driver with an error symbol:

If you see , , or next to the Apple Mobile Device USB driver, follow these steps:

Examples Of Usb Devices

  1. Restart the Apple Mobile Device Service.
  2. Check for and resolve issues with third-party security software, then restart your computer.
  3. Try to install the usbaapl64.inf or usbaapl.inf file again.
Coments are closed

Most Viewed Posts

Scroll to top